How To Download And Install Printer Driver For Canon Printer Setup

For non-tech, downloading and installing the printer driver and software for Canon Printer Setup is a painful task. Though, it is quite essential to set up your Canon printer if you bring it today to your home or office premises as it gives the ability to start printing immediately. Printer Setup includes unboxing, loading paper stack, installing ink cartridges, downloading printer drivers, and installing the software as well. Once you are capable enough to complete all these processes, your printer is then all set to be printing high-quality. In this guide, you will come to know how to freely set up your printer and start a print job. So, let's do it without any delay! 

Step-By-Step Guidance For Canon Printer Setup

Here, we have compiled entire Canon Printer Setup procedures one-by-one which will take you to set up your printer in an effortless manner. So, let’s walk through them accordingly:

Step 1: Prepare Your Canon Printer

The very beginning step you need to take is to prepare your printer.

· Put your printer device on a flat table and make sure any objects are not placed in front of the printer. Open the Rear Tray and extend the Paper Support. Open the Front Tray, and extend the Output Tray Extension.

· Plug-in the power cord into the printer appropriately and connect the other end to the wall outlet.

· Press the “POWER” button to turn on the printer.

· Open the “Top Cover”. The Print Head Holder moves to the center.

Step 2: Install The Print Head

The next step you should take for Canon Printer Setup is to install the Print Head. Go through the following points for this:

· Take out the Print Head from its package first.

· Remove the orange protective cap from the Print Head and discard it.

· Slightly raise the Print Head Lock Lever until it stops. The Print Head Lock Lever is quite heavy.

· Push the Print Head to hold it in place, and lower the Print Head Lock Lever carefully.

· Make sure that the Print Head is installed properly

Step 3: Install The Ink Cartridges

Now, to get a quality printout, you need to install the ink cartridges most appropriately. Here is the guide to do this, let’s follow them:

· Remove the orange tape in the direction of the arrow to peel off the protective film and take out the film completely.

· Twist off and discard the orange protective cap located on the bottom of the ink tank.

· Insert the ink tank into the right-hand slot and press the mark on the ink tank until it adjusts into its slot.

· Make sure the ink lamp lights red.

· Close the Top Cover

The hardware setup is complete. Now start the software setup of your printer. In the next step, you will see how.

Step 4. Install Canon Printer Driver

Perfect guidelines for installing Canon Printer Driver are mentioned underneath. Let’s go through them one-by-one:

· First navigate the official site of Canon Printer

· Next, Search for the Download tab and give a click on it to get the driver downloaded

· Once the printer driver is been downloaded to your PC

· Go to that folder and click the downloaded Canon Printer drivers. The file name ends in exe format for windows

· Accept the default location to save the Drivers

· Click “Next”, and wait until the installer extracts the files and prepare for installation on your system

· Follow the on-screen prompted instructions until you reach the “Finish” tab

· When finished the driver installation, restart your computer

· Now, connect your computer to the printer using a Wi-Fi network and then start printing hassle-freely

Contact Canon Printer Setup Support For Your Printer Setup

If the information you find here is pointless and hence unable to set up your Canon Printer, then contact to Canon Printer Setup team. They are available at the 24/7 helpline number. So, call them as soon as possible and get fruitful instruction for printer setup.

View Source:- https://butlerkaci12.medium.com/how-to-download-and-install-printer-driver-for-canon-printer-setup-d093268cfafd